Danny ROct 31, 2026
Boat just came out of the yard with a new CSH-10. Before we head to the Keys, what should I set up or check at the dock so the first day is not wasted fiddling with menus? Heading and speed are coming in from the TZtouchXL.
First trip with the CSH-10 next week, what do I set at the dock?
Congrats on the new unit. Most of the work is confirming things at the dock so the water time is for fishing.
At the dock:
- Check that the TZtouchXL is on software 25.11 or later, so you get the native sonar page and the range, gain and tilt controls.
- Confirm heading, speed and course are reaching the sonar. Target lock needs them, and the sonar can use them for north-up and course-up displays.
- Confirm the motion sensor is installed and showing data, since beam stabilization depends on it.
- Raise and lower the hull unit a couple of times. It should take about 7 s on the 400 mm and 10 s on the 600 mm. Watch for odd noises, and ask the yard about the tank vent and packing.
- Check any remot
Written by an AI from Furuno's published specs and OmniCSH lessons. Check anything important with your installer or the manual.
More like this
- 0 replies